๐ŸŽ‰ Limited Time Offer: Get 10% OFF on Your First Order!

Why the Cheapest Packaging Quote Is Usually the Most Expensive โ€” A TCO Reality Check

My Take: In Packaging and Print, the Lowest Quote Is Almost Always the Most Expensive

If you're picking a vendor by unit price instead of total cost of ownership (TCO), you've probably already lost the deal โ€” and just don't know it yet. That's my position, and it comes from a pile of expensive mistakes. I've been handling packaging and print orders for nine years now โ€” glass containers, tape, flyers, posters, promo items โ€” and I've personally blown roughly $23,000 of budget across a handful of them. I now maintain our team's purchasing checklist mostly so the next person doesn't have to pay the same tuition I did.

The temptation is easy to understand. The quote comes in, you line up the unit prices row by row, pick the lowest one, and it looks like you're doing your job. But the unit price is only the tip of the iceberg. TCO folds in shipping, setup fees, minimum-order penalties, rejects, rework, and delay โ€” and almost nobody actually does that arithmetic before hitting approve. According to the U.S. Bureau of Labor Statistics Producer Price Index, paper and plastics packaging materials got roughly 20% more expensive between 2020 and January 2025. In a market that moves like that, a 'cheap' quote you got 90 days ago barely means anything (prices for reference only; verify current rates).

Argument 1: The Unit Price Is a Deliberately Trimmed Number

From the outside, comparing quotes looks like comparing prices. The reality is that the number on the line is the one part of the quote that's been groomed into something neat โ€” it's the only figure on the page that was designed to be compared. Vendors know this better than buyers do. The quote that came through several hands usually has pallet fees, plate or setup charges, rush premiums, and a 'small but not really' starting quantity tucked into the footer in small print (like 'minimum 5,000 units').

In the fall of 2021 we needed 2,000 8-oz glass jars for a holiday program. The first quote we received looked great per jar. It didn't include pallet unloading fees. The 'bulk rate' tier started at 5,000 units. Once we added the actual quantity back in, along with freight and warehouse receiving, the real landed cost came out $0.14 per jar higher than a cleaner, slightly pricier quote from a supplier that simply spelled everything out. That's when we went with the transparent vendor โ€” Fillmore Container, the fillmore container company we now use for recurring glass packaging orders. The invoice total was higher than we'd hoped, but it didn't come back three weeks later with a surprise attached.

That's what I call the surface illusion: a low unit price doesn't mean a low total cost. It just means that one line was trimmed more aggressively than the others.

Argument 2: Saving 40 Cents a Roll on Tape Costs You More the First Time the Line Stops

We switched masking tape suppliers in November 2019 โ€” the kind of no-brainer decision that looked obvious because it saved us $0.40 a roll. We picked the low quote from a handful of masking tape manufacturers, and the first few batches seemed fine. Six weeks in, the tape snapped inside the rollers and stopped the line four separate times. Each stop was roughly 25 minutes, not counting re-threading and cleaning off residue. On paper we 'saved' $160. The downtime worked out to about $600.

What most people don't realize is that masking tape pricing is split between the backing paper and the adhesive (if your quote is broken down enough to show it), and those two components behave completely differently once order volumes scale up. Thin paper with cheap adhesive looks fine after a day in the lab. Put a carton on a pallet for 400 miles and it stops cooperating (Source: Shurtape technical guide, 2024). We started writing backing weight and adhesion strength into the purchasing spec after that. The problem hasn't come back since.

Side note: someone on my team honestly couldn't tell electrical tape from masking tape until last year. Ask them what electrical tape is made out of and you'd get a shrug. It's PVC backing with a rubber-based pressure-sensitive adhesive (Source: 3M technical data sheet, 2024). Why should you care? Because backing materials swing the price a lot. If you don't know what material you're buying, you can't price a 'cheaper alternative' โ€” you just get led around by the unit price column.

Argument 3: Print Is the Worst Offender โ€” Because Nobody Looks at the Numbers on a Poster

Print is where it's easiest to stare at the unit price, because 'printed' sounds like 'printed' either way. We bought a batch of posters for office wall decor โ€” poster room decor, essentially โ€” from the lowest bidder, and we ran 500 flyers through the same vendor. Colors came out warm-shifted, and the text was pulled 3mm in from the edge. A client spotted it at a trade show before we did.

The most frustrating part of it: the same problem keeps recurring even when the spec is written out clearly. You'd think CMYK values and bleed lines in the file would prevent misunderstandings, but interpretation varies โ€” wildly. Reprinting those flyers plus the rush shipping ended up costing more than the highest quote we originally turned down.

So glad I double-checked the quantity field before submitting. The vendor had listed units in pounds, and I was one click away from ordering 10x what we needed โ€” an easy mistake to make when you're rushing at 6pm on a Friday (ugh, still haunts me).

'We Know We Should Look at TCO โ€” We Just Don't Have Time'

This is the pushback I hear most. Fair enough. Most buyers don't have the bandwidth to build a financial model for every PO. I don't either. I do a three-line calculation:

  • All-in landed cost (unit price + freight + handling + rush fees).
  • Time cost (what it costs you if it's late, and what accelerating it would cost).
  • Rework risk (the historical defect rate for that category ร— the cost of doing it over).

Three rows, five minutes in Excel. You'll find plenty of 'more expensive' quotes that are actually cheaper once those three lines are filled in. And the vendors that keep winning on unit price tend to earn the difference back on line two or line three โ€” a bill that just arrives three months later. That's the red flag to watch for.

So My Conclusion Hasn't Changed

Next time you get three quotes, don't start by comparing the top row. Put freight, minimums, rush fees, and rework risk on the table first, and ask one question: 'What does it cost to get this delivered to me, intact?' The answer is often different from what your eyes hit first. This isn't accounting trivia either โ€” it ties into production, sales, and the customer relationship all at once. The bottom line: cheap is bought, but cost is calculated.

If you're just taking over purchasing, my advice is to build your own checklist before the first reprint invoice hits the system. That's how I started. It just cost me $890 in reprint fees and a one-week delay to figure out.

$blog.author.name

Jane Smith

Sustainable Packaging Material Science Supply Chain

Iโ€™m Jane Smith, a senior content writer with over 15 years of experience in the packaging and printing industry. I specialize in writing about the latest trends, technologies, and best practices in packaging design, sustainability, and printing techniques. My goal is to help businesses understand complex printing processes and design solutions that enhance both product packaging and brand visibility.

Ready to Make Your Packaging More Sustainable?

Our team can help you transition to eco-friendly packaging solutions